LawnMaster OcuMow® DM16-350 Plus MX 24V Drop and Mow Robotic Lawnmower Power Kit-With Spare Battery & Blades

The VBRM16 Plus OcuMow® uses a camera combined with two ultrasonic sensors to navigate around your garden. The camera detects the difference between surface textures and colours, for example grass or paving, and the ultrasonic sensors detect obstacles higher than 6cm, such as plants, garden furniture, walls and fences meaning there is no need for a boundary wire.

To keep the mower within the lawn area, your lawn must be bordered on all sides by a hard, visually distinctive border. This can be a flat border of paving, gravel or wooden boards, or a raised edge such as border edging, walls or fences. The mower can detect some edges that are not distinctive however for best and correct operation making your borders clearly defined will improve edge detection and allow the robot to work correctly.

If the mower cannot recognise a clearly defined lawn edge, it may not stay within the lawn area. Bare earth borders which can become weedy, or flower borders with low plants can be interpreted as grass by the Optical Grass Recognition (OGR) software. For this reason, we recommend that either raised edges, a hard border of paving or gravel, or walls and fences are the best options around the lawn.

Unlike traditional robots the VBRM16 Plus OcuMow® is designed to Drop and Mow. The mower is designed to be placed on the lawn once or twice a week and will mow for up to 4 hours on a single charge covering 200m2. The mower should be stored away in a dry place between uses.

The mower stops approximately 10 - 20cm away from the edge of the lawn, meaning some grass will remain uncut. This can easily be taken care of with a grass trimmer such as our battery compatible LawnMaster MX 24V Grass Trimmer. Lawn edges should be kept neatly trimmed so that the VBRM16 Plus OcuMow® can easily see the edge of the lawn.

The mower will cover 200m²on a single charge.The VBRM16 Plus OcuMow® Power Kit includes two MX 24V 4.0Ah batteries, covering a lawn area of up to 350m².

No. As the VBRM16 Plus OcuMow® requires good light in order for the camera to function, this mower can only be used in the daytime. The robot will not operate outside daylight hours.

The grass is cut using three small sharp blades and the clippings are returned to the lawn surface where the nutrients contained in them fertilise the soil. This means stronger, healthier grass with less need for supplemental fertiliser and has the added bonus of helping the lawn retain water in dry periods. It also means no grass clippings to dispose of or compost. Provided that the VBRM16 Plus OcuMow® is used regularly (i.e., once or twice a week) the clippings are not visible to the eye.

It is possible to use the VBRM16 Plus OcuMow® on lawns with a pond, however it is strongly recommended that the pond is surrounded by a raised barrier to safeguard against the mower falling in. We recommend either a raised edge or a paved/gravel border at least 75cm wide surrounding the pond. Water damaged mowers are not covered under guarantee.

The VBRM16 Plus OcuMow® has a safety key which can be removed to prevent children starting the mower unsupervised. Safety sensors stop the blades if the mower is lifted or flips over. The mower is also equipped with ultrasonic sensors which will avoid obstacles higher than 6cm. We recommend that children and pets are not left unsupervised with the mower while it is operating.