
Regular price €19,99
Free Delivery on Orders Over €100
Buy Direct from the Makers
Aftersales Support
Support
VK1620SWC-01L
Learn how to set up and use your L Class dust extractor with instruction manuals, user guides and FAQs.
1. Remove all the contents from inside of the vacuum cleaner container.
2. Turn the container upside down. Insert two rear wheels and two front casters into the slots and apply pressure until they click into place. Secure them with supplied screws.
3. Your vacuum cleaner comes ready for dry vacuum cleaning with the cartridge filter and nylon pre-filter pre-installed.
4. Optionally, for improved dust filtration, fully fit the dust bag flange onto the inlet stub.
5. For wet vacuuming, replace the cartridge filter and nylon pre-filter with the foam filter supplied. Do not use a dust bag when wet vacuuming.
6. Secure the power head back on the container, using the 2 side latches. Insert the locking end of the hose into the suction port of the container and turn clockwise to lock into place.
7. Choose the desired accessories and/or extension wands and push fit onto the hose nozzle.
General Maintenance
1) Keep all safety devices, air vents and the motor housing free of dirt and dust. Use a soft, dry brush to clean the equipment regularly.
2) Clear all dirt or debris from the collection tank after each use. Allow to dry before replacing the power head. Do not use cleaning agents or solvents; these may damage the appliance.
3) Check the hose, attachments, and power cord to verify that they have not been damaged or any debris is trapped and blocking airflow.
Cleaning Cartridge Filter
Remove the filter and clean by gently tapping or brushing off dirt. For optimal performance it is recommended to replace the old filter with a new filter regularly.
Cleaning Foam Filter & Nylon Pre-filter
Remove the foam filter or nylon pre-filter and use a mild soap and water solution to wash and rinse with clean water. Allow filter to air dry before installing and using again.
Cleaning & Replacing Exhaust Filter
1) Unlock the exhaust filter door by lifting the locking tab upwards to the release. Pull the door out.
2) Remove the exhaust filter from the vacuum and clean by gently tapping or brushing off dirt. For optimal performance it is recommended to replace the old filter with a new filter regularly.
3) Install the cleaned or new filter. Then insert the filter door tabs into the upper slots and lock the filter door into place.
Genuine Vacmaster accessories and spare parts for your machine.
We stock a wide range of spare parts if you'd like to repair your machine, rather than replace it. If you can't find the part you are looking for in the accessories section above, please get in touch with us. For safety, certain parts may not be available individually, but as part of a combined unit.
FAQ
This can be caused by:
1) No Power. Check the power supply and fuse.
2) Functional fault in the power cord, switch, or motor. Have the damaged part checked by qualified personnel or contact the customer care team.
This can be caused by:
1) Power tool wattage is not compatible with the power tool take-off socket. Check the wattage is compatible with the power tool take-off socket.
2) Incorrect operating mode selected. Ensure the switch is moved into position II.
This can be caused by:
1) Dust bag is full. Replace the dust bag.
2) Suction nozzle, hose, or tank inlet is blocked. Check the suction nozzle, hose, and tank inlet for obstructions.
3) Cartridge filter is blocked. Remove the cartridge filter and clean.
4) Float valve has closed. Empty the container of any liquid waste and ensure the float value located underneath the filter is able to move freely.
Support
We’re here to empower you with the knowledge and solutions to make the most of your machine, and to support you when you just need a helping hand. Our friendly customer service team are here to help.
This Vacmaster appliance comes with a 1-year guarantee.
2-7 Day Standard Delivery:
Standard delivery lead times are between 2-7 days for mainland European countries.
Delivery cost is calculated at the time of purchase and will be displayed at checkout.
Delivery is free for orders over €100.
Non EU member countries could be subject to import duties. Please check this with your customs authority for details.
Returns:
We hope that you are happy with your purchase but if that's not the case, unused, undamaged products can be returned for a refund within 30 days of receipt.
Our aim is to keep it personal. Our friendly customer service team are there if you need a helping hand.
Sign up to our mailing list and get 15% off your next purchase, plus access to exclusive benefits including: