-
Free Delivery
-
Buy Direct from the Makers
-
Aftersales Support
How to Clean and Maintain Your Robot Lawn Mower?
Share
A robot lawn mower can take much of the repetitive work out of keeping your garden tidy. Instead of walking behind a mower every time the grass needs cutting, you can let the machine handle regular mowing while you spend more time enjoying the space.
However, less hands-on mowing does not mean maintenance disappears. Grass clippings can collect around the wheels and cutting area, dirt can cover the camera, and blades gradually wear through use. A simple care routine helps you notice these changes before they interrupt your mowing schedule.
For owners of LawnMaster OcuMow® robotic mowers, the starting point is understanding the particular model. A portable Drop & Mow machine and an automatic-charging mower share some maintenance needs, but their charging arrangements and storage instructions are not identical.
This guide explains how to approach cleaning, blade care, battery maintenance and seasonal storage, while keeping the instructions supplied with your mower as the final reference.
Why Regular Maintenance Matters
Your robot mower works close to the ground, where grass, soil, leaves and small debris can accumulate. Over time, this buildup can make routine inspection more difficult and interfere with moving parts.
The cutting system deserves particular attention. Grass wrapped around components, damaged blades or loose fittings should not be ignored. A mower that suddenly sounds different or leaves an uneven finish needs checking rather than simply another mowing session.
Vision-based machines also depend on a clear view of the lawn. Keeping the camera area clean is therefore an important part of caring for an OcuMow, alongside checking that the garden borders remain suitable.
Maintenance is not about making the mower look new after every use. It is about keeping essential areas clean, identifying wear and following the correct operating procedure.

Start with the Instructions for Your Exact Model
Before cleaning, locate the manual for your mower and review its safety, cleaning and maintenance sections.
Do not assume that advice for another robot mower applies to yours. Different models can have different water-cleaning permissions, shutdown procedures and battery arrangements.
For example, the LawnMaster OcuMow DM16-150 uses a removable battery charged separately. The OcuMow AMB16i-600 Plus operates with an automatic-charging station. Those differences affect preparation for maintenance.
As a cautious starting point, use dry cleaning methods and avoid spraying the mower. Do not use a pressure washer. Only use water, cleaning products or other treatments where the exact model’s instructions permit them.
How to Clean Your Robot Lawn Mower
1. Stop the Mower and Isolate the Power
Never clean a mower while it is operating, charging or capable of starting unexpectedly.
Stop the machine, wait for the cutting system to come to a complete standstill and follow the shutdown procedure in its manual. Remove the isolator key and removable battery where the instructions require this.
For charging-station maintenance, disconnect the relevant power supply as directed before working on the station.
Wear protective gloves when working around the cutting area. Gloves provide protection, but they do not make sharp blades safe to handle casually. Keep your fingers away from cutting edges and avoid turning components by hand unless the maintenance instructions specifically require it.
2. Brush Away Loose Grass and Debris
Begin with a soft brush to remove loose grass, leaves and soil from accessible areas.
Pay attention to the wheels, wheel recesses and underside, using the positioning method permitted by the manual. Support the mower securely rather than balancing it awkwardly.
Work gently around cables, sensors and other fittings. Do not force a tool into narrow gaps or use a sharp metal scraper to remove stubborn material.
If compacted grass cannot be removed safely using an approved method, consult the manual or support team rather than applying more force. Cleaning should not create damage that was not there before.
3. Inspect the Cutting Area
Once loose material has been removed, visually inspect the blades and their surrounding components.
Look for damaged cutting edges, missing parts, trapped material or anything that appears loose or distorted. Do not continue mowing with a visibly damaged cutting system.
Avoid improvising repairs, fitting unsuitable screws or attempting to straighten damaged components. Use the replacement parts and procedures specified for your model.
If an inspection requires removing a cover or accessing an area outside the owner-maintenance instructions, leave that work to an appropriate service provider.
4. Clean the Camera Area and Exterior
OcuMow uses camera and sensor technology to help recognise grass and suitable lawn boundaries. The camera area should therefore be included in your cleaning routine.
Remove loose dust gently and clean the surface using the method approved in the manual. Avoid abrasive pads, harsh chemicals or polishing products that could scratch or leave residue.
Clean the outer body with similar care. Where a cloth is permitted, avoid allowing moisture to enter openings, electrical connections or the battery compartment.
Before reassembly or charging, make sure the relevant areas are clean and dry.
A Practical Maintenance Checklist
The following table provides a routine to build around your mower’s official instructions. Increase inspection frequency when conditions cause more debris to collect, and follow any intervals specified in the manual.
| Area | What to check | When to include it |
|---|---|---|
| Lawn | Toys, branches, stones and other loose objects | Before mowing |
| Wheels and underside | Grass buildup, trapped debris and visible damage | After use as needed |
| Camera and sensor areas | Dirt, clippings or residue covering exposed surfaces | During regular cleaning and after dirty conditions |
| Blades and cutting assembly | Wear, damage, missing fittings or trapped material | At the manual’s inspection interval and after an impact |
| Battery and accessible connections | Visible damage, contamination or unusual changes | During charging and maintenance checks |
| Charging station, where fitted | Debris, visible cable damage and obstructed access | During routine garden checks |
| Complete mower | Cleaning, condition and storage preparation | Before seasonal storage and before restarting |
A new noise, impact, charging problem or unusual mowing behaviour calls for an additional inspection. Do not wait for the next routine check if something appears wrong.
Blade Care: Small Parts That Deserve Attention
Blades are wear items, so their condition should be checked throughout the mowing season.
Instead of replacing them according to a universal calendar, use the inspection guidance in your manual and consider the conditions in which the mower works. Lawn size, operating time and contact with debris can affect wear.
If the finish becomes noticeably uneven, inspect the blades alongside other possible causes, such as grass buildup or unsuitable mowing conditions. Do not assume a poor result always means the same fault.
The LawnMaster Robotic Lawnmower Blades pack contains fifteen blades, providing five complete sets of three. Its product guidance specifies replacing all three blades simultaneously.
Follow the correct replacement procedure and use the specified fittings. Do not sharpen or modify blades unless the manufacturer expressly permits it. If you are unsure about the condition of the carrier or mounting points, seek assistance before restarting the mower.
Caring for the Battery and Charging Equipment
Battery care should begin with using the correct battery and charger for the exact mower.
Do not assume every battery within a shared-voltage family is suitable for every model or application. Check the mower’s compatibility information before purchasing a spare or changing the supplied configuration.
Keep accessible battery connections clean and dry, using only the approved cleaning method. Do not use a battery that is visibly damaged, swollen, leaking or behaving abnormally. Stop use and obtain appropriate support.
For automatic-charging machines, inspect the accessible station area and cables without dismantling electrical equipment. Keep the approach clear and follow the manual when cleaning charging contacts; avoid adopting abrasive cleaning advice written for a different brand.
A compatible station shelter may be a useful accessory, but it does not replace correct installation, electrical safety or the mower’s seasonal storage requirements.
Look After the Garden as Well as the Mower
Some apparent mower problems begin with changes in the garden rather than faults in the machine.
Plants can grow over an edge, gravel can move, and toys or fallen branches can appear between mowing sessions. A lawn that met the installation requirements earlier in the season may need attention later.
Check that recognised borders remain clear and that excluded areas are still arranged correctly.
For compatible models, the LawnMaster No-Go Magnetic Strip Kit can help define areas that should not be mown. Compatibility must be checked against the exact mower, because magnetic strip support should not be assumed across the entire OcuMow range.
Keeping the garden suitable is part of routine care, not just a one-time installation task.

Preparing for Seasonal Storage
Before putting the mower away for an extended period, clean it thoroughly, inspect for wear and address any damage.
Store the mower in the clean, dry indoor conditions specified in its manual, away from children. Protect the underside from standing water, and do not leave the machine stored upside down outdoors.
Battery preparation is model-specific. Do not apply one storage-charge percentage to every OcuMow. Removable-battery Drop & Mow instructions and automatic-charging instructions can differ, so check the exact guidance for charge level, temperature and any periodic charging.
Automatic-charging owners should also follow the instructions for disconnecting the station’s power supply and deciding whether the station can remain outdoors.
When the mowing season returns, inspect the mower, charging equipment and lawn before restarting. Storage does not replace a fresh safety check.
When to Stop and Ask for Help
Routine owner maintenance has limits.
Stop using the mower if you find a damaged blade assembly, exposed wiring, a damaged battery or another condition that could affect safe operation. Repeated charging faults, unusual vibration or persistent navigation problems also deserve investigation.
Record the model number and any displayed message before contacting support. A clear description of what changed, when it happened and what you observed is more useful than repeatedly restarting the machine.
Avoid dismantling sealed components or attempting repairs outside the manual’s owner-maintenance guidance.
A Simple Routine for Long-Term Care
Cleaning and maintaining a robot lawn mower does not need to become a complicated project. Regular inspections, gentle cleaning and timely replacement of worn parts provide a practical foundation.
For LawnMaster OcuMow owners, the key is combining those habits with the instructions for the exact model. Portable mowing, automatic charging and different battery arrangements each bring their own requirements.
Keep the mower clean, keep the garden suitable and investigate changes early. That approach helps make robotic mowing a manageable part of lawn care, leaving more time to enjoy the garden it maintains.