Skip to content
  • Free Delivery

  • Buy Direct from the Makers

  • Aftersales Support

How to Adjust the Cutting Height of a Robot Lawn Mower?

Share
Link
https://eu.cleva.com/en-fr/blogs/lawnmaster-robotic-lawn-mowers-tips-guides/how-to-adjust-the-cutting-height-of-a-robot-lawn-mower

FAQ: How do you adjust the cutting height on a robot lawn mower?

To adjust the cutting height of a robot lawn mower, first stop the mower and make sure it is no longer running. Then locate the mower’s cutting-height adjustment mechanism and set it to the height that suits your lawn. For the LawnMaster OcuMow® AMD18i-800 Plus MX 24V Auto Charging Vision Robotic Lawnmower with App, model VBRM18AMID4R Plus-03, the cutting height can be continuously adjusted within a range of approximately 20–80mm. A higher setting can be useful when the grass is longer or when establishing a mowing routine, while the height can then be gradually reduced as the lawn is brought to the desired length.

Why Does Robot Lawn Mower Cutting Height Matter?

Cutting height is more than a cosmetic setting. It affects how much grass is removed during each mowing session and can influence how the lawn looks and responds to different growing conditions.

The ideal height depends on the type of lawn, season, weather and how quickly the grass is growing. The Royal Horticultural Society (RHS) recommends regular mowing while avoiding the removal of more than one-third of the grass height at a time. For an ordinary domestic lawn, it gives a general range of around 13–25mm in summer and up to 40mm in spring and autumn, while finer lawns can be maintained at shorter heights.

This does not mean every robot lawn mower should simply be set to one of these heights. The available adjustment range varies between models, so always use the settings specified for your particular mower.

For gardeners using a robot mower regularly, the more useful approach is to treat cutting height as an adjustable part of your mowing routine rather than a setting that is chosen once and forgotten.

When Should You Change the Cutting Height?

There are several situations where robot lawn mower cutting height adjustment can be useful.

1. When the grass is longer than usual

If the lawn has grown significantly between mowing sessions, avoid immediately selecting the lowest cutting height.

LawnMaster’s OcuMow® 18 Plus support guidance recommends raising the cutting height when establishing the mower on a lawn. It also advises against asking the robot to remove more than 20mm of grass length in a single cut, as this can affect battery runtime, contribute to grass-clipping build-up underneath the mower and produce an uneven-looking lawn.

If the grass is substantially longer than your desired final height, a conventional mower can first bring it closer to the target height. The robot mower can then maintain it with smaller, more regular cuts.

2. At different times of year

Grass growth changes with weather and season.

During periods of strong growth, you may find that a moderate cutting height works better than immediately aiming for the shortest possible setting. In cooler periods, growth may slow considerably, so mowing frequency and height can be adjusted according to the actual condition of the lawn.

The RHS similarly recommends adapting mowing to grass growth, soil conditions and seasonal weather rather than following a rigid schedule.

3. When establishing a new mowing routine

A robot lawn mower may need some time to establish a consistent mowing pattern.

LawnMaster’s OcuMow® 18 Plus guidance recommends starting at a higher cutting height if necessary, then reducing the height gradually over one to two weeks until the desired lawn length is reached.

This gradual approach can be particularly useful when introducing a robot mower to a lawn that has previously been maintained with a conventional petrol, cordless or electric mower.

How to Adjust the Cutting Height: A Practical Step-by-Step Guide

The exact adjustment method varies between robot lawn mower models. Always check the relevant user manual before making an adjustment.

For a mower with a mechanical cutting-height selector, the general process is:

  1. Step 1: Stop the mower

    Before accessing the cutting-height mechanism or underside of the mower, stop the machine and follow the manufacturer's instructions for safely carrying out maintenance or adjustments.

    Do not attempt to adjust the cutting height while the mower is operating.

  2. Step 2: Check the current setting

    Identify the current cutting-height position. If the mower has several numbered settings, note where it is currently positioned before making a change.

    This makes it easier to return to the previous setting if required.

  3. Step 3: Select the desired height

    Choose a higher cutting height if the grass is currently long or if you want to remove less grass during each mowing session. A lower cutting height can be selected when the lawn is already sufficiently short and conditions are suitable.

    For the LawnMaster OcuMow® AMD18i-800 Plus MX 24V Auto Charging Vision Robotic Lawnmower with App, model VBRM18AMID4R Plus-03, the cutting height is continuously adjustable from approximately 20mm to 80mm. This allows you to choose a suitable height within the adjustment range according to the current condition of your lawn, rather than being limited to a fixed number of preset positions.

    For example, you can start at a higher height when establishing a mowing routine and gradually lower the cutting height as the lawn reaches the desired length.

  4. Step 4: Let the mower maintain the lawn

    Once an appropriate height has been selected, allow the robot mower to work through its normal schedule.

    The aim is not to remove large amounts of grass at once. Regular mowing allows the mower to maintain the lawn progressively.

What Cutting Height Should You Choose?

There is no single cutting height that works for every garden.

A simple starting point is to consider the condition of the grass rather than choosing the lowest available number.

Long or recently overgrown grass: Start higher and reduce the height gradually.
Regularly maintained domestic lawn: A middle setting can provide a useful starting point, depending on the grass type and desired appearance.
Very short ornamental or fine lawn: A lower setting may be appropriate, but only if it is within the mower's specified range and suitable for the turf.
Changing seasonal conditions: Consider increasing the height when the grass needs less frequent cutting or when conditions make aggressive mowing undesirable.

The important principle is consistency. A robot mower works best as a lawn-maintenance tool, rather than as a machine for cutting down long grass in one session.

LawnMaster OcuMow® 18 Plus: Cutting Height and Everyday Automation

For gardeners looking for a robot mower that combines adjustable cutting with automated operation, the LawnMaster OcuMow® AMD18i-800 Plus MX 24V Auto Charging Vision Robotic Lawnmower with App is designed for gardens of 100–800m².

The model uses an 18cm cutting width, has a random cutting pattern, supports mulching and includes a rain sensor. Its cutting height can be adjusted from 20mm to 80mm across seven settings.

LawnMaster OcuMow® AMD18i-800 Plus MX 24V Auto Charging Vision Robotic Lawnmower with App

The OcuMow® 18 Plus is also designed for automatic charging. When its battery is low, it can return to the docking station, recharge and continue its mowing routine. The product specification lists a 24V Max, 4.0Ah MX 24V battery, with a stated charging time of approximately 120 minutes.

This combination is useful for gardeners who want to set an appropriate cutting height and then allow the mower to maintain the lawn according to a schedule, rather than manually operating a mower every time the grass needs attention.

Common Cutting-Height Mistakes to Avoid

A few simple mistakes can make robot mowing less effective.

  • Choosing the lowest setting immediately

    Shorter does not automatically mean better. If the grass is long, start higher and reduce the height progressively.

  • Removing too much grass in one cut

    For OcuMow® 18 Plus, LawnMaster specifically advises against cutting more than 20mm of grass length at once.

  • Ignoring the actual lawn condition

    Weather, growth rate and previous mowing all affect which height makes sense.

  • Assuming every LawnMaster model has the same settings

    The cutting-height range is model-specific. Always check the specifications for the particular LawnMaster robot lawn mower you own.

Find the Right LawnMaster Robot Lawn Mower

Cutting-height adjustment is a small but important part of getting better results from a robot lawn mower. The best setting depends on your lawn, grass growth and the mower itself.

If you are comparing different models, the LawnMaster robot lawn mower range includes OcuMow® models designed for different garden sizes and operating requirements. Comparing cutting range, charging method, navigation system and available cutting-height settings can help you choose a model that matches your garden.

Explore the LawnMaster Robot Lawn Mower Range

For the LawnMaster OcuMow® 18 Plus, the key point is straightforward: its 20–80mm adjustable cutting-height range gives you flexibility to adapt mowing to the condition of your lawn, while automatic charging, scheduled operation, vision navigation and mulching are designed to support regular lawn maintenance.

In short, the right robot lawn mower cutting height is not necessarily the lowest one. Start with the condition of your grass, remove only a manageable amount at each cut, and adjust gradually until the mower is maintaining the lawn at the height you want.